#1

Cobalt-Chromium Alloy Outermost Corrosion Resistance to Enhance

in Top Real Estate Developers Mon Dec 25, 2017 12:16 pm
by cobaltalloy • 2 Posts

Due to the need for turbochargers for piston-aero engines, Co-based superalloys have been developed. In 1942, the United States first made turbocharger blades with the dental metal Vitallium (Co-27Cr-5Mo-0.5Ti). In the course of this alloy carbide phase precipitation continued to become brittle. Therefore, the alloy carbon content reduced to 0.3%, while adding 2.6% nickel, in order to improve the solubility of carbide forming elements in the matrix, thus evolving into a HA-21 alloy. In the late 1940s, the X-40 and HA-21 were used to make aircraft jet and turbocharger cast turbine blades and guide vanes that operated at temperatures of 850 to 870 ° C. The S-816, which was used as a forged turbine blade in 1953, is an alloy solid-solution strengthened with a variety of refractory elements.

Vacuum welding super grade silver tungsten alloy appearance of the outermost layer of the substrate to improve the corrosion resistance of a certain amount of help, but can not completely prevent erosion of the primer. Therefore, the primer itself good corrosion resistance is the key to maintaining the appearance of IXL. In the manganese metal, steel metal, nickel metal, lithium metal and other non-corrosion easily oxidized metal can not be directly welded IXL appearance, due to the metal base material is easy to corrosion, or outermost non-dense micro stomata, the outermost layer Impurities hard to wipe clean, the direct use of vacuum welding methods in the outermost layer of superficial IXL welding appearance, the Golden Bridge electrode does not prevent the primer for a long time to continue to be corroded, if not through oil seal and other special treatment, the appearance of easy to fall off.

For copper extrusion die, seal ring and other high temperature, corrosion-resistant, wear-resistant areas. High wear-resistant, high-speed sintered oil-bearing. High proportion of alloy. Powder metallurgy plant in addition to a complete production of powder metallurgy equipment, all kinds of mechanical processing equipment are readily available, advanced processing methods, high precision, not only to meet the follow-up processing of powder metallurgy products, but also to other complex parts processing system . Smelting, casting plant Our factory and the Chinese Academy of Sciences Institute of metal superalloy laboratory cooperation, research and development and manufacturing strength, adequate equipment. One 13 vacuum smelting furnace, up to 500Kg semi-continuous, as small as 25Kg induction furnace, according to any standard production of cobalt-based, nickel-based master alloy, casting. GH series, K series, Cobalt-Chromium Alloy(Division too) series of alloys, all kinds of heat-resistant steel, ultra-low carbon stainless steel. And for some alloys forging, rolling, drawing and other processing. Among them, the use of pressure casting production of difficult copper alloy castings, in particular, require suppression, welding of copper alloy parts, is a major specialty factory.

Scroll up


Visitors
0 Members and 5 Guests are online.

We welcome our newest member: Farah
Board Statistics
The forum has 1360 topics and 1584 posts.

0 members have been online today: